Multi-Use Descaler

Multi-Use Descaler

Magic All Purpose Descaler breaks down limescale, mineral build-up, and mould, while its non-toxic formula helps maintain appliance performance.

  • Removes Limescale
  • Cleans & Sanitises
  • Extends Appliance Life
  • Reduces Energy Use
  • Australian Made & Owned

 Fact Sheet

Product Description

Over time, limescale, mineral deposits, and mould can build up inside appliances that use water. This is especially common in areas with hard water, where higher mineral content leads to faster build-up. Traditional cleaning methods can be time-consuming and may not be suitable for all appliances. Harsh acids such as sulphuric acid can also cause damage and should be avoided.

Magic All Purpose Descaler is a non-toxic, biodegradable, and septic-safe solution that’s Certified Australian Made & Owned. It’s designed to dissolve limescale and hard water deposits, helping your appliances perform better, last longer, and use less energy.

Features:
  • Removes limescale, mineral build-up, and mould
  • Improves appliance performance and longevity
  • Reduces energy consumption
Ideal for:

Kettles • Urns • Coffee Machines • Dishwashers • Steam Ovens • Steam Irons • Baby Bottle Sterilisers • Water Coolers • Shower Heads and more.

How to Use

Directions: Always refer to the Manufacturer’s User Manual before using this product.

Note: Only for use on scaled appliances. Not suitable for use with aluminium or appliances sensitive to acid (such as enamel, marble, silver or zinc plated).

For Kettles, Jugs and Urns: (Recommend to descale monthly)

  1. Dissolve one scoop per 1 litre of WARM water.
  2. Add pre-mixed solution to appliance ensuring the element and scaled surfaces are completely covered by the solution.
  3. Bring appliance to boil and turn off.
  4. Let solution sit for 5 minutes.
  5. Empty appliance and rinse thoroughly before use.

For Steam Irons: (Recommend to descale monthly)

  1. Dissolve one scoop into 500mL of WARM water.
  2. Fill iron with premixed solution to max level.
  3. Turn the iron to the HOT setting until the light turns off. Ensure the STEAM setting is on.
  4. Unplug the iron, shake gently, and then place on a cake rake or heatproof dish over the sink to catch discharged liquid.
  5. Leave for 10 minutes (or until empty). Briefly press the spray button to drain any remaining solution.
  6. Repeat steps 2 to 4 until liquid runs clear.
  7. Rinse thoroughly with cold water, drain and wipe the baseplate clean.
  8. It is safe to discard the used solution down the sink as it is septic and grey water safe.

Handy Hint: Use Iron Baseplate Cleaner to clean the iron’s baseplate. [link to product]

For Dishwashers: (Recommend to descale monthly)

  1. Empty all items from the dishwasher and clean waste filters.
  2. Fill the detergent dispenser with one scoop to normal level and sprinkle any sachet remnants on the inside base of the dishwasher. Run on normal cycle.
  3. After the cycle, wipe clean in and around the door seals and hinges.

Handy Hint: To clean your Washing Machine, use Magic Anti-Bacterial Washing Machine Cleaner.

Coffee/Espresso/Pod Machines: (Recommend to descale monthly)

  1. Dissolve one scoop in 1 litre of WARM water.
  2. Remove water filters from your machine if fitted. Pour the premixed solution into the water compartment.
  3. Run approximately 1 cup of solution through the descale cycle into a cup (if descale option is not available, use the standard brew cycle). Wait 10 minutes.
  4. Run the remainder of the solution through the steam wand (if fitted) into a cup. Ensure the solution is covering the end of the wand. Wait 10 minutes.
  5. Rinse the machine by running one full compartment of fresh water through the machine or until the water is clear.
  6. It is safe to discard the used solution down the sink as it is septic and grey water safe.

For Shower Heads:  

  1. Dissolve one scoop in 1 litre of WARM water.
  2. Detach the shower head and place it into a bowl or bucket.
  3. Pour premixed solution over shower head until completely immersed; add extra water if required.
  4. Leave for 10-15 minutes for the descaler to work.
  5. Discard the solution, wash the shower head with clean water and reattach.
  6. It is safe to discard the used solution down the drain as it is septic and grey water safe.

Handy Hint: If shower head is not easily removed or difficult to place into a bucket. Pour premix solution into a plastic bag and tie it to the shower head.

For Water Coolers:

  1. Dissolve one scoop in 1 litre of WARM water.
  2. When the water bottle is empty, remove it and drain the water reservoir.
  3. Pour the premixed solution into the water cooler reservoir.
  4. Leave for 5-10 minutes.
    NOTE: Warn others that cleaning is in the process and avoid drinking the water.
  5. Empty the reservoir using the cooler spout/tap.
  6. When empty, rinse with 1L of clean water through the cooler and repeat if necessary.
  7. Replace with a new water bottle and use as normal. It is safe to discard the used solution down the sink as it is septic and grey water safe.

For Baby Sterilisers:

  1. Dissolve one scoop in 1 litre of WARM water.
  2. Empty baby steriliser completely.
  3. Pour the premixed solution into your steriliser as if you were running standard sterilisation (volume will depend on the brand of your machine)
  4. Run steriliser through a normal cycle.
  5. Make sure to not let the solution run dry.
  6. Once complete, discard the solution from the steriliser.
  7. Thoroughly rinse the steriliser and repeat if necessary.
  8. It is safe to discard the used solution down the sink as it is septic and grey water safe.

For Steam Ovens:

  1. Dissolve one scoop in 1 litre of WARM water.
  2. Follow the descaling instructions listed under “Cleaning and Care” in your appliance manual.
  3. It is safe to discard the used solution down the sink as it is septic and grey water safe.

Before & After

KETTLE

IRON

Important: It is crucial to descale your household appliances well before they reach the heavy scaling seen in the kettle "before" photo. Scale build-up can lead to heating elements burning out. When encrusted with scale, the element struggles to conduct heat effectively through this layer, resulting in overheating and eventual failure of the element.